Router & RADIUS
The Router page manages your NAS (Network Access Server) devices and the RADIUS profiles used for client authentication and bandwidth control.
Add a Router
Click Tambah Router and fill in:
| Field | Required | Description |
|---|---|---|
| Short Name | No | Friendly label (e.g. router-01) |
| RADIUS Secret | Yes | Shared secret between MikroTik and FreeRADIUS |
| Tunnel Username | Yes | L2TP/PPP username for VPN tunnel |
| Tunnel Secret | Yes | L2TP/PPP password |
| TR-069 DHCP Range | No | CIDR range for ACS device management (e.g. 192.168.18.0/24) |
After adding a router, follow the Setup Guide tab on the router detail page to configure MikroTik correctly.
Router Setup Guide
The setup guide inside each router’s detail page walks you through:
- Register L2TP client interface to the VPN server
- Add an IP route for the company subnet
- Register the RADIUS server (auth + accounting)
- Enable RADIUS Accounting and Interim-Update
- Set the PPP profile gateway (
local-address) so PPPoE clients get a gateway - Enable RADIUS Incoming (for CoA / disconnect)